Basement waterproofing cost is usually $3 to $10 per sq ft of basement. Interior solutions average about $3,000; exterior waterproofing averages about $7,000 or more; a full system for a 1,000 sq ft basement averages about $13,640 (This Old House). A single basement leak repair at a crack runs about $250 to $1,000.
Waterproofing prices vary more than most home repairs because "waterproofing" covers everything from a $300 crack injection to a $20,000 excavation. The way to read a quote is to break it into the pieces below.
Basement waterproofing cost by method
| Method | Interior or exterior | Typical cost |
|---|---|---|
| Crack injection | Interior | $250 – $1,000 per crack |
| Interior perimeter drain | Interior | $40 – $120 per linear foot |
| Sump pump | Interior | $600 – $2,500 |
| Vapor barrier (walls) | Interior | $1,500 – $4,000 |
| Dehumidifier installation | Interior | $1,000 – $2,800 |
| Silicate concrete sealer | Interior | $3 – $9 per sq ft |
| Liquid membrane | Exterior | $3 – $6 per sq ft |
| Sodium bentonite | Exterior | $2 – $5 per sq ft |
| Excavation | Exterior | $50 – $200 per cubic yard |
| Exterior French drain | Exterior | $10 – $100 per linear foot |
| Yard grading | Exterior | $500 – $3,000 |
| Gutters | Exterior | $3 – $30 per linear foot |
Interior vs exterior basement waterproofing cost
| Interior | Exterior | |
|---|---|---|
| Typical project | ~$3,000 average | ~$7,000+ average |
| Main cost driver | Linear feet of drain, concrete cutting | Excavation depth and length |
| Disruption | Inside the basement | Yard, landscaping, walkways |
Source: This Old House.
Illustrative example
For illustration only, using the ranges above. A 30 x 40 ft basement has about 140 linear feet of perimeter. An interior drain along the full perimeter at $40 to $120 per foot is roughly $5,600 to $16,800, plus a sump pump ($600 to $2,500). If only one 40 ft wall leaks, a partial drain on that wall plus a sump would be far less. That's why the first question to ask is how many feet of drain a quote includes.
What drives the price
- Perimeter length and how much of it actually leaks.
- Wall type: block walls often need weep holes; poured walls may just need crack work.
- Concrete: cutting and re-pouring the floor for an interior drain.
- Discharge: distance to daylight or a storm connection.
- Finishes: removing and replacing drywall, flooring or built-ins.
- Access: tight yards, decks or driveways for exterior work.
How to save without cutting corners
- Fix gutters and grading first. Cheap, and sometimes enough.
- Treat the leaking section, not the whole perimeter, when water only comes in on one side and the contractor agrees.
- Get three quotes on the same scope.
- Ask for the warranty in writing, including whether it transfers.
Have each contractor mark on a sketch exactly where the drain runs and where the pump discharges. Quotes that look similar on price often cover very different lengths.
Quote comparison checklist
Put each quote side by side and fill in:
| Item | Quote A | Quote B | Quote C |
|---|---|---|---|
| Linear feet of interior drain | |||
| Number of sump pumps | |||
| Battery or water-powered backup | |||
| Wall membrane or flange | |||
| Weep holes (block walls) | |||
| Discharge location and freeze protection | |||
| Crack injections included | |||
| Dehumidifier included | |||
| Concrete restoration | |||
| Warranty terms and transferability |
Most price differences come down to the first three rows.
Financing and timing
Many waterproofing companies offer financing. Compare the total cost of financing with the cash price. Scheduling outside the busy wet season can also make it easier to get the crew you want.
Cost by basement size
Illustration only, using the $3 to $10 per sq ft range (Fixr).
| Basement size | Typical range |
|---|---|
| 500 sq ft | ~$1,500 – $5,000 |
| 1,000 sq ft | ~$3,000 – $10,000 |
| 1,500 sq ft | ~$4,500 – $15,000 |
Perimeter length and how much of it leaks matter more than floor area for interior drains, so use this only as a rough check.
Frequently asked questions
How much does basement waterproofing cost?
Typically $3 to $10 per sq ft. Interior fixes average about $3,000, exterior about $7,000 or more.
How much does basement leak repair cost?
A single crack injection usually costs $250 to $1,000. Leaks at the wall-floor joint usually need drainage, which costs more.
How much does exterior basement waterproofing cost?
This Old House puts exterior projects around $7,000 or more, with excavation at $50 to $200 per cubic yard.
How much does interior basement waterproofing cost?
Interior solutions average about $3,000; full-perimeter drains with a sump can cost much more.
Is basement waterproofing worth it?
If water comes in regularly, usually yes: it protects finishes, prevents mold and supports resale. Fix the cheap exterior items first.
Is basement waterproofing tax deductible?
Generally not for a primary home, though it may count toward the home's cost basis. Ask a tax professional.
Do I need a permit for basement waterproofing?
Some jurisdictions require permits for sump pump discharge, electrical work or exterior excavation. A reputable contractor will know local rules.
How much does it cost to waterproof a 1,000 sq ft basement?
Roughly $3,000 to $10,000 at $3 to $10 per sq ft; This Old House puts a full system around $13,640.
Is it cheaper to waterproof during construction?
Yes. Exterior membranes and footing drains cost far less before backfill than after.
The fastest way to pin down your basement waterproofing cost is to have two or three contractors quote the same scope. Call the number on this page and we'll connect you with a participating local waterproofing company.
Written and fact-checked by DryLevel editors, last updated 2026-11-16. Costs come from the sources linked in the article. Read our editorial policy or report a correction.