A pier and beam foundation holds the house up on piers (concrete, block or wood posts) and beams, with a crawl space underneath. Common problems are settled or rotted piers, failing shims, sagging beams and damp crawl spaces, which show up as sloping, bouncy or squeaky floors. Pier and beam repair costs about $6,000 to $14,000 on average, around $10,000 (Angi), and is often less disruptive than slab repair because the crawl space gives access.
Pier and beam houses are common in older neighborhoods and in places with expansive soil. Their big advantage is access: a contractor can crawl underneath, measure every support and fix them one at a time.
Common pier and beam foundation problems
| Problem | What you notice |
|---|---|
| Settled or tilted piers | Sloping floors, doors out of square |
| Shims that rotted or compressed | Low spots, gaps between beam and pier |
| Undersized or rotted beams | Sagging floors along a line |
| Weak or rotted joists | Bouncy, soft spots between beams |
| Damp crawl space | Musty smell, mold, wood rot |
| Termite damage | Hollow wood, soft framing |
How pier and beam repair works
- Measure: the floor and every pier with a level or laser.
- Re-shim where piers are sound but gaps opened.
- Replace or add piers where piers settled or were too far apart.
- Sister or replace beams and joists where wood is damaged. See crawl space repair.
- Level the house gradually. See house leveling cost.
- Fix moisture: drainage, vapor barrier or encapsulation.
Pier and beam repair cost
| Item | Typical cost |
|---|---|
| Pier and beam repair (typical job) | $6,000 – $14,000 (avg ~$10,000) |
| Adding new piers | $800 – $4,000 each |
| Beam replacement | $400 – $1,200 each |
| Pier and beam repair range (Fixr) | $2,000 – $15,000 |
Pier beam house maintenance
- Keep the crawl space dry: gutters, grading, vapor barrier.
- Check for standing water after heavy rain.
- Look for termite tubes and soft wood once a year.
- Re-level when floors slope noticeably, before doors and drywall suffer.
Shims are supposed to be hardwood or steel. If you see stacks of softwood scraps or bricks on top of piers, plan on re-shimming properly; those settle and rot.
Inspecting a pier and beam house from the crawl space
What a contractor or engineer looks at:
- Piers: tilted, cracked, sunk, or spaced too far apart.
- Shims: compressed, rotted, or stacked from scrap.
- Beams: sagging, cracked, rot at bearing points.
- Joists: rot, termite damage, cuts and notches.
- Moisture: standing water, damp soil, vapor barrier condition.
- Ventilation: blocked vents, humidity.
Pier and beam vs slab: repair differences
| Pier and beam | Slab | |
|---|---|---|
| Access | Crawl space | Excavation or slab penetration |
| Typical fixes | Re-shim, new piers, sister beams | Steel or helical piers, foam |
| Disruption | Mostly under the house | Yard and sometimes interior |
| Plumbing risk during lift | Lower | Higher |
How often does a pier and beam house need re-leveling?
It depends on soil and moisture. Houses on expansive clay may need shim adjustments every several years as soil moves with seasons; houses on stable soil may go decades. Controlling crawl space moisture slows the cycle.
Signs of pier and beam problems from inside the house
- Floors that slope, sag or bounce in specific rooms.
- Squeaks along a line (often a beam).
- Gaps between floors and baseboards.
- Doors that stick in one part of the house.
- Cracks in drywall over doors and windows.
Pier types you may find under older homes
| Pier type | Notes |
|---|---|
| Concrete block stacked piers | Common; check for tilting and shims |
| Poured concrete piers | Durable if on proper footings |
| Wood posts | Prone to rot and termites; often replaced |
| Brick piers | Check mortar and settlement |
| Steel adjustable posts | Often added in repairs; adjustable later |
Keep the crawl space working for you
The crawl space is what makes pier and beam foundations easy to repair, and it's also where problems start. Keep it vented or sealed according to your plan, keep water out, and look underneath once a year for wet soil, tilted piers and pest activity.
Frequently asked questions
What is a pier and beam foundation?
A foundation where the house rests on beams supported by piers or posts, with a crawl space underneath, instead of on a slab.
How much does pier and beam foundation repair cost?
Angi puts most repairs at $6,000 to $14,000, about $10,000 on average. New piers cost $800 to $4,000 each.
Why are my floors sloping in a pier and beam house?
Usually settled or tilted piers, compressed shims, sagging beams, or rot from a damp crawl space.
Is pier and beam repair cheaper than slab repair?
It's often less disruptive because contractors can reach the supports from the crawl space, but cost depends on the damage.
Can you convert a pier and beam house to a slab?
It's possible but rare and expensive. Repairing and maintaining the pier and beam system is far more common.
How long does pier and beam repair take?
Re-shimming can be done in a day or two; replacing piers and beams can take several days.
How often do pier and beam houses need shimming?
It varies with soil. On expansive clay, shims may need adjusting every several years; on stable soil, much less often.
Are pier and beam houses worse than slab houses?
Neither is worse overall. Pier and beam is easier to access and repair; slabs avoid crawl space moisture issues.
A pier and beam foundation can usually be repaired one support at a time from the crawl space. Call the number on this page to talk with a participating local foundation company.
Written and fact-checked by DryLevel editors, last updated 2026-11-16. Costs come from the sources linked in the article. Read our editorial policy or report a correction.