Most foundation crack repair in poured concrete uses injection: polyurethane foam to seal leaking cracks, or epoxy to bond a stable crack structurally. Non-structural crack injection usually costs $250 to $800 per crack; minor structural crack repairs run $1,000 to $5,000, and major ones $10,000 to $30,000+ (HomeGuide). Injection seals a crack; it doesn't stop movement, so active cracks need the cause fixed too.
A crack is a symptom. Before deciding how to repair it, it's worth knowing what it's a symptom of. Thin vertical shrinkage cracks just need sealing. Cracks from settling or soil pressure need stabilizing first, or the repair cracks again.
Polyurethane vs. epoxy crack injection
| Polyurethane injection | Epoxy injection | |
|---|---|---|
| Main purpose | Stop water | Structural bond |
| How it behaves | Expands into foam, stays flexible | Cures rigid, stronger than concrete |
| Best for | Leaking, non-structural cracks | Stable cracks that need strength restored |
| Handles movement? | Some flexibility | No, can re-crack if wall moves |
| Wet cracks? | Works in wet or actively leaking cracks | Needs a drier crack |
Both are injected through ports set along the crack from inside the basement, after the surface is sealed so the material fills the crack through the wall's thickness.
How injection works
- Clean the crack surface.
- Set injection ports every several inches along the crack.
- Seal the surface over the crack with epoxy paste.
- Inject from the lowest port upward until material appears at the next port.
- Cure, then grind off the ports and surface seal if desired.
Other foundation crack repair methods
- Carbon fiber strips or stitches: reinforce cracked walls against further movement; often used with bowing walls. HomeGuide puts carbon fiber strips at $900 to $2,000+ per crack.
- Wall anchors and piers: for cracks caused by pressure or settlement; see bowing walls and foundation piers.
- Exterior excavation and membrane: for persistent leaks, at much higher cost.
Foundation crack repair cost
| Repair | Typical cost |
|---|---|
| Non-structural crack injection | $250 – $800 per crack |
| Carbon fiber strips | $900 – $2,000+ per crack |
| Minor structural crack repair | $1,000 – $5,000 |
| Major structural repair | $10,000 – $30,000+ |
| Crack sealing / epoxy (Fixr) | $200 – $1,000 |
Sources: HomeGuide, Fixr. Thumbtack reports a broader national range of $1,982 to $7,290 for fixing a cracked foundation, which reflects jobs that include more than injection.
DIY crack repair: when it works
DIY injection kits exist for poured walls. They can work on a single thin, dry, non-moving crack. They're the wrong choice when:
- The crack is horizontal or stair-stepped (likely structural).
- It's wider than about 1/4 inch or growing.
- It's in a block wall (hollow cores won't hold the material).
- Water is pouring through (needs a pro and possibly drainage).
Ask whether the contractor's injection warranty covers re-leaks, and for how long. A good crack injection should come with a written leak warranty.
Epoxy vs polyurethane crack injection
| Polyurethane | Epoxy | |
|---|---|---|
| Purpose | Stop water | Bond the crack structurally |
| Flexibility | Flexible, tolerates slight movement | Rigid |
| Best for | Leaking cracks in poured walls | Non-leaking cracks needing strength |
| Cure | Fast, expands to fill | Slower |
Neither fixes a wall that's still moving. If a crack keeps reopening, the cause needs a repair: piers, bracing or drainage.
How foundation crack injection works
- Clean the crack and surface.
- Set ports along the crack.
- Seal the surface between ports with paste.
- Inject from the bottom port up until material appears at the next port.
- Cure, then cut off the ports.
Questions to ask about crack repair
- Is this crack structural, or just a leak?
- Polyurethane or epoxy, and why?
- Will you inject from the inside or seal from the outside?
- What does the warranty cover if it leaks again?
Frequently asked questions
What is the best way to repair a foundation crack?
For leaking, non-structural cracks in poured concrete, polyurethane injection. For stable cracks needing strength, epoxy injection. Active cracks need the cause stabilized first.
How much does foundation crack repair cost?
HomeGuide puts non-structural crack injection at $250 to $800 per crack, minor structural repairs at $1,000 to $5,000, and major repairs at $10,000 to $30,000+.
Is epoxy or polyurethane better for foundation cracks?
Polyurethane is better for stopping leaks and handles some movement; epoxy is better for restoring structural strength in stable cracks.
Can I fix a foundation crack myself?
A single thin, dry, stable crack in poured concrete can be sealed with a DIY kit. Horizontal, wide, growing or block-wall cracks need a professional.
How long does foundation crack injection last?
A properly injected crack in a stable wall often lasts for many years; cracks in walls that keep moving can reopen.
Can I inject a foundation crack myself?
DIY injection kits exist and can work on small, stable, non-structural cracks in poured walls. Leaking cracks under pressure and structural cracks are better left to a pro.
Foundation crack repair is one of the smaller foundation jobs when the crack isn't structural. Call the number on this page to get a participating local foundation company to take a look.
Written and fact-checked by DryLevel editors, last updated 2026-11-16. Costs come from the sources linked in the article. Read our editorial policy or report a correction.